Tips to Save Electricity When Cooking Rice in an Electric Pressure

The rice cooker and electric pressure pot are essential household appliances.They can help us conveniently cook a good pot of rice. It greatly saves our time and energy, but although it is just a small appliance, there are some energy-saving tips to follow when using it besides the details to consider when purchasing.After daily use of the rice cooker, it's best to place it on the table for storage to prevent dust from entering the bottom of the cooker, and do not place it in the kitchen or near water splashes to ensure safe usage.During use, you should also maintain cleanliness between the inner pot and heating element to avoid water droplets and rice grains that can affect cooking results and potentially damage components. When purchasing a high-power rice cooker,

do not plug it into the same outlet as other appliances to prevent excessive heat from the power cord due to insufficient capacity of the outlet, which could lead to safety hazards.After using the rice cooker, always unplug the cord. It usually has an automatic warming function that can waste electricity if left plugged in when not cooking. Since many households use a rice cooker daily, although its power consumption is smaller than major household appliances, the cumulative energy savings should not be underestimated due to frequent usage.

When making rice, rinse and soak the rice in clean water for about 15 minutes before cooking. This can significantly shorten cooking time and produce particularly fragrant rice. Make full use of residual heat from the heating element. When the rice cooker's water boils,

turn off the power switch for 8 to 10 minutes, then re-activate it to utilize the remaining heat before turning it back on again.

When the yellow light comes on after the red one turns off,

indicates that the rice is cooked. Turn off the power and use the residual heat for another 10 minutes to keep warm. Avoid peak electricity usage times. Using appliances with the same wattage at lower voltages requires extended usage time, so it's best not to use or reduce usage during peak hours. Regularly clean the inner and outer pots. If they are not cleaned promptly,

rust may accumulate on the bottom and exterior surfaces of the inner pot. Soak them in water and gently scrub with a rough cloth until the metallic luster is revealed. Ensure proper contact between the base of the inner pot, the heating element, and both the inner pot and lid.

If the inner pot is deformed—either concave or convex—it can affect its bottom surface's contact. Adjust it as needed to maintain optimal performance. If an electric rice cooker is not cleaned promptly after prolonged use, it will develop a layer of oxide on the inner pot's bottom and outer surface; immerse it in water and rub with a coarse cloth until the metallic luster is revealed.

The base of the inner pot should maintain optimal contact with the heating element, as well as good contact with the inner pot and lid. If the inner pot deforms, either by sinking inward or bulging outward, it will affect its proper bottom contact; such deformities should be corrected promptly.